Download AirMobile2 on PC With GameLoop Emulator

AirMobile2 on PC

AirMobile2, coming from the developer ZenSystem Lab, is running on Android systerm in the past.

Now, You can play AirMobile2 on PC with GameLoop smoothly.

Download it in the GameLoop library or search results. No more eyeing the battery or frustrating calls at the wrong time any more.

Just enjoy AirMobile2 PC on the large screen for free！

AirMobile2 Introduction

IN BRIEF - AIRPACK (recuperator)

HOME SCREEN - this is your panel where you can:

• switch the recuperator's operation between the operating modes (Automatic, Manual, Momentary) - depending on the needs

• activate additional functions (Airing, Empty house, Open window, Fireplace)

• control the use of filters when your AirPack is AirPack4 Energy ++, which has the AFC module

• find out more by clicking on the alarm icons when they appear

• view the current status of the device functions

• and of course turn the control panel on / off

MENU

• Home - this is where you will return to the home screen

• Visualizations - you will check the current parameters of the device

• Settings - you will change the settings *: Filters, Operation modes, Additional functions, Bypass, GHE *

• Info - here you will find data about the recuperator

• Your devices - you will add a new device and you will see a list of your devices with the most important information

* menu items depend on the added installation elements.

WHAT AND WHERE?

1.

First things first: register your device and give it a name.

2.

Adjust the work rhythm of the recuperator to your life rhythm. In the Automatic mode settings (weekly program) - set the parameters of up to 4 time segments for each day of the week, according to the daily demand. For a more active time of the day - set a higher ventilation intensity, for a less active one - lower, and if you want to ventilate the house before returning, set additional ventilation. The more you adjust the ventilation parameters for your home activity, the more you will benefit from it.

3.

It is known that sometimes it is different, and even the best-set automatic mode will not always respond to our needs. In such situations, use the change to Manual or Momentary Mode, or use additional functions, adjusting parameters to temporary needs.

4.

Why the bypass function? So that the air flows directly into the building, bypassing the heat exchanger. This way, with the outside air in summer, you can cool the rooms when the temperature outside is lower than in the house. And in the transitional period, you will heat them when the temperature outside is higher than inside the building. Choose when you want Bypass to activate.

5.

Adjust the settings of the Modes, Additional Functions, GHE or Bypass to make the best use of the capabilities of your devices.

6.

You can also add other devices, such as the Particle + central air purifier, by adding them in the menu - Your Devices.

IN BRIEF - PARTICLE + (air purifier) ​​

HOME SCREEN - this is your panel, where:

• turn on or off your Particle +

• alarm icons will inform you about errors

• switch the purifier's operation between Automatic and Manual modes

• you will change the Filter intensity for Manual Mode

• you will set the PM dust concentration level for the Automatic Mode

• you will see the current filter usage

• PmSensor Out sensor informs you about the concentration of dust in the air flowing from Particla + to your home

• a PmSensor In will inform you about the concentration of dust from the outside air entering Particle +, if you additionally equip your installation with it

MENU

• Home - this is where you will return to the home screen

• Visualizations - you will see the current parameters of the device

• Settings - you will change settings for Operation modes, Dust type and Automatic filter control

• Info - here you can check data about the purifier

• Your devices - you will add a new device and you will see a list of your devices with the most important information