Download CH340 Terminal on PC With GameLoop Emulator

CH340 Terminal sa PC

Ang CH340 Terminal, na nagmumula sa developer na bezzalogowe.pl, ay tumatakbo sa Android systerm sa nakaraan.

Ngayon, maaari mong laruin ang CH340 Terminal sa PC gamit ang GameLoop nang maayos.

I-download ito sa GameLoop library o mga resulta ng paghahanap. Hindi na tumitingin sa baterya o nakakadismaya na mga tawag sa maling oras.

I-enjoy lang ang CH340 Terminal PC sa malaking screen nang libre!

CH340 Terminal Panimula

This application enables user to send commands to USC-16 servo controller and other devices using CH340 USB to serial chip. Plug in the device using USB OTG cable and the application will start automatically. Set positions and speed using seekbars. Position range is 500-2500 μs. You can move three groups of servos at the same time. Speed is inversely proportional to time, time can be set from 100 ms to 1000 ms. Your Android device must have USB OTG feature and must be able to power the slave device. When your Android device is networked, you can send commands to it using UDP, for example:

send:

echo "#1P1500T100" > /dev/udp/192.168.0.164/6000

echo "#1P600#2P900#8P2500T100" > /dev/udp/192.168.0.164/6000

echo "#1GC2" > /dev/udp/192.168.0.164/6000

echo "#1G#3G#1GC2" > /dev/udp/192.168.0.164/6000

receive:

netcat -ul 6000

For Samsung Galaxy S3 Neo (GT-I9301I) you can turn on power to the slave device using "Power to USB" feature.

The app uses CH34xUARTDriver which can be downloaded here:

http://www.wch.cn/download/CH341SER_ANDROID_ZIP.html