Descarga Active Mobile V4 en PC con GameLoop Emulator

Active Mobile V4 en PC

Active Mobile V4, proveniente del desarrollador JFL ALARMES, se ejecuta en el sistema Android en el pasado.

Ahora, puedes jugar Active Mobile V4 en PC con GameLoop sin problemas.

Descárgalo en la biblioteca de GameLoop o en los resultados de búsqueda. No más mirar la batería o llamadas frustrantes en el momento equivocado nunca más.

Simplemente disfrute de Active Mobile V4 PC en la pantalla grande de forma gratuita！

Active Mobile V4 Introducción

With Active Mobile V4 you can:

– Check the status of the control panel in real time.

– Arm and disarm the alarm system.

– View the zones in floor plan.

– View the site cameras.

– Customize notification sounds

– Notification with siren sound when the switchboard fires up to 30 seconds.

– Link camera to zone or PGM of the control panel.

– Access camera from notification.*

– Hear confirmation of the action performed.

– Activate and deactivate the PGM outputs with simultaneous viewing of the cameras.

– Receive information notifications from the control panel.

Active Mobile V4 supports:

– Activate 20 (all models) versions equal to or greater than 4.5.

– Activate 32 Duo versions equal to or greater than 4.5.

– Activate 100 Bus versions equal to or greater than 4.5.

– Activate 20 Bus versions equal to or greater than 6.0.

– For connection via cloud with Active 20, Active 32 Duo, Active 100 Bus and Active 20 Bus control panels, versions equal to or greater than 5.3 and ME-04 module with versions equal to or greater than 2.0 are required.

– ECR 18 Plus with ME-04 module with versions equal to or greater than 2.0.

– SmartCloud-18 with ME-04 module with versions equal to or greater than 2.0.

– SmartCloud-32;

The application is compatible with the following products from the JFL CCTV line via cloud: DVRs from the WD-4100, WD-4200, WD-3000, WD-3100, DHD-1000N, DHD-1100N, DHD-2000N, DHD-2100N, DHD-3200, DHD-3300, DHD-3300 PoC, DHD-5000, DHD-5100, DHD-5200 and DHD-8000, Speed ​​Domes SP-2015 IP, Speed ​​Dome SP-2010, SP-2002 IP Mini, and camera CHD-1030 IP/CHD-1030 IP Dome and CHD-2130 IP/CHD-2130 IP Dome.

– The application does not support connection to the CCTV line via IP/Domain.

* Only for Active line with version 6.0 or higher. For Active 20 Bus control panel version 6.3 or higher.

Your opinion is very important to us.

Comment and send suggestions in the store so we can improve it even more.