用GameLoop模拟器在電腦上玩SMART CONSTRUCTION Pilot

SMART CONSTRUCTION Pilot 電腦版

來自發行商 Komatsu Ltd. 的 SMART CONSTRUCTION Pilot 能夠在安卓系統上運行。

現在，您可以在電腦上使用 GameLoop 模擬器流暢地玩 SMART CONSTRUCTION Pilot。

在 GameLoop 遊戲庫或搜索結果中下載。 不需要再暢玩遊戲時盯著電池電量或被令人懊惱的來電打斷。

只需在電腦大屏幕上免費下載暢玩SMART CONSTRUCTION Pilot 電腦版！

SMART CONSTRUCTION Pilot 簡介

※In order to use this application, it is necessary to install 「SMART CONSTRUCTION Retrofit Kit」to the machine.　「SMART CONSTRUCTION Retrofit Kit」 is applicable to all hydraulic excavators regardless of model.

This 「SMART CONSTRUCTION Pilot」 is dedicated application for use of 「SMART CONSTRUCTION Retrofit Kit」. It will digitalize a conventional hydraulic excavator and provides 3D Machine Guidance and Payload capabilities.

【　Features　】

①Construction using 3D Machine Guidance with 3D design data

②Payload（Option）

③「SMART CONSTRUCTION Retrofit Kit」 can be installed to any hydraulic excavator regardless of model (target model to be expanded sequentially)

【　How to use　】

①　Connect 「SMART CONSTRUCTION Retrofit Kit」 and the tablet device with 「SMART CONSTRUCTION Pilot」 installed to the WiFi router

②　Start the application

※ For details, please read the operation manual of this application

【　Warnings　】

●　In order to use this application, please prepare a fixture to install the tablet device in the operator cabin

●　In order to use this application, the tablet device must be connected to a Wifi router.

●　While using the application, it consumes considerable amount of power during operation, therefore please prepare a power supply device for the tablet

●　Please install tablet, fixture and power supply device so that it does not fall off and to the location which do not interfere the operation of the machine and field of view. Interference or falling of the tablet device, fixture, or power supply device during operation may cause damage, injury, or serious personal injury.

●　When attaching/detaching and adjusting the position of the tablet device or fixing device, make sure to set the position of lock lever to lock position and stop the engine beforehand

●　When operating the application, make sure to stop the machine and check the safety of the surrounding area to ensure that there is no contact with other machines or site workers, and to prevent yourself from turning over and crashing

●　This application uses the location, angle, sensor information from 「SMART CONSTRUCTION Retrofit Kit」

●　The cutting edge accuracy varies depending on operating method or operating conditions

●　Make sure to conduct startup inspections and daily maintenance to the machine that to be connected with the application

●　For more details, please read the operation manual, SMART CONSTRUCTION Application User Guide and manual of tablet fixture, power supply device